Pe Casing Spacers

1. Gpt Pe Casing Spacers
2. Pipe Casing Spacer
3. Casing Spacers For Pvc Pipe
4. Psi Casing Spacers
5. Polyethylene Casing Spacers

Gpt Pe Casing Spacers

BS3106
HDPE Casing
Bore Spacer

Bore Spacer to hold 3 ea. 3-1/2', 1 ea. 2' & 1 ea. 1-1/2' EPC80 (Sch.80) PVC Conduits in a 14.000 OD x 1.273 Min. Wall (DR11.0) HDPE Casing

Polypropylen casing spacers are universally applicable in the installation of pipelines when a media pipe runs through a casing pipe. Plastic insulators provide many advantages for these applications:. Easy penetration of carrier pipe. The insulator´s friction coeficient is reduced to a mnimum because they are made of plastic. Casing isolators/spacers shall be PSI Model PE molded from high density polyethylene plastic in two segments for applications on carrier pipe diameters of 12″ and under. Model PE isolator/spacers will be provided in multiple segments for applications on carrier pipe diameters of over 12″. The casing spacers eliminate the need to fill the casing annulus with sand and as they are so easy to remove, it allows damaged pipes to be repaired or replaced quickly. Let us know what your required runner height is (annular clearance between the inner pipe and the outer casing) and we will offer you a suitable solution for your pipeline. Polypropylen casing spacers are universally applicable in the installation of pipelines when a media pipe runs through a casing pipe. Plastic insulators provide many advantages for these applications: Plastic insulators are suitable for all pipe diameters from 25 mm upwards and many skid heights are available to suit specifi c requirements.

BS1569
HDPE Casing
Bore Spacer

Bore Spacer to hold 4 ea. 6' EPC40 (Sch.40) PVC Conduits in a 24.000 OD x 1.412 Min. Wall (17.0 DR) HDPE Casing

Pipe Casing Spacer

BS3384W5
HDPE Casing
Bore Spacer

Bore Spacer to hold 4 ea. 5', 2 ea. 2' & 1 ea. 3' (DR11.0) HDPE Conduits in a 30.000 OD x 2.727 Min. Wall (DR11.0) HDPE Casing

Casing Spacers For Pvc Pipe

BS1714W5
HDPE Casing
Bore Spacer

Bore Spacer to hold ea. 6', 2 ea. 1-1/2' & 1 ea. 4' EPC40 (Sch.40) PVC Conduits in a 36.000 OD x 3.666 Max. Wall HDPE Casing (Directional Bore)

Contact one of our sales representatives today
to inquire about a quote from Underground Devices
or call us today at 800-800-2118

Psi Casing Spacers

Model HT Casing Spacers / Isolators

High temperature-rated casing spacer/isolator for use with small diameter pipes.

Model HT Casing Spacers/Isolators are uniquely formulated to withstand high temperature applications (280° F / 138° C), and are designed primarily for smaller diameter steel or polyethylene carrier pipes (ANSI O.D. pipe without a bell or mechanical joint).

Model PE Casing Spacers

High density, injection molded virgin polyethylene casing isolators/spacers designed primarily for smaller diameter steel or polyethylene carrier pipes

Model PE casing spacers/isolators combine excellent safety and performance with durability and easy installation to deliver a high quality solution for a range of small-diameter piping applications. PE Isolators should not be used on concrete carrier pipe.

Ranger II® Casing Spacers

An all non-metallic casing isolator/spacer system that uses molded segments to encircle the carrier pipe

Each segment of the Ranger II® casing spacer includes at least one molded-in runner and one slide lock.

Polyethylene Casing Spacers